Alignment clamp positioned during final above water tie-in
On September 10, 2021, the sections of the second Nord Stream 2 pipeline laid from the German shore and Danish waters was connected in a so-called above water tie-in. The opposing pipe strings were lifted from the seabed by the lay barge Fortuna and the pipe ends were cut and fitted together. The welding to connect the two lines took place on a platform located above the water on the side of the vessel. Then the connected pipeline was lowered to the seabed as one continuous string.
Source: © Nord Stream 2 / Axel Schmidt
|JPEG||300 dpi||26.3 MB||4000 px × 2664 px||CMYK||Download|
|JPEG||300 dpi||8.4 MB||4000 px × 2664 px||RGB||Download|
|JPEG||72 dpi||1.1 MB||1400 px × 932 px||RGB||Download|
Photo may be used for news reports about Nord Stream 2 if the source is credited: © Nord Stream 2 / Axel Schmidt.